Home > HRF Whip Mounts > Kawasaki Whip Mounts
Sort By:
Page of 1
2012-15 Kawasaki KX450F whip mount

HRF 2012-2015 KX450F whip mount
This whip mount is designed specificly for the 2012-2015 Kawasaki KX450F dirt bike.
It mounts up to the sub-frame on the right side under the rear fender next to the exhaust.
It keeps the saftey flag out of the riders way and up off the ground so it can serve its purpose.
There is no drilling or modification of the bike needed. Just bolt it on and go ride.

**** HRF RECOMMENDS USING A 1/4" OR 5/16" THICK SAFETY FLAG. DO NOT USE THE BIG 3/8" THICK BUGGY/TRUCK FLAGS. THESE ARE TOO BIG FOR BIKES ****

Note: The HRF Quick release flag holder shown in pictures is sold separately. Click here to purchase

Retail Price: $39.99
2006-2008 Kawasaki KX450F whip mount

HRF 2006-08 Kawasaki KX450F whip mount. This whip mount bolts up between the sub-frame and the muffler. Easy installation. All necessary hardware included.

Sorry but this whip mount will not work on the years 2006-2008 KX250F

**** HRF RECOMMENDS USING A 1/4" OR 5/16" THICK SAFETY FLAG. DO NOT USE THE BIG 3/8" THICK BUGGY/TRUCK FLAGS. THESE ARE TOO BIG FOR BIKES ****

Note: The HRF Quick release flag holder that is shown in pictures is sold separately. Click here to order.

Retail Price: $39.99
2009-2011 Kawasaki KX250F/450F exhaust side whip mount

This whip mount is designed specifically for the 2009-2011 Kawasaki KX450F dirt bikes. This mount bolts up to the sub-frame on right side under the fender next to the exhaust. Very simple installation, no modification of the bike needed. Comes with all necessary hardware if needed. This also will fit the 2009-2012 KX250F.

**** HRF RECOMMENDS USING A 1/4" OR 5/16" THICK SAFETY FLAG. DO NOT USE THE BIG 3/8" THICK BUGGY/TRUCK FLAGS. THESE ARE TOO BIG FOR BIKES ****

NOTE: The HRF Quick release flag holder shown in pictures is sold separately. Click here to purchase

Retail Price: $39.99
HRF Kawasaki Seat bolt style whip mount

This HRF whip mount is designed to mount up to the seat bolt mounting points and then it hangs over the rear fender. Will work on KX125/250, KX250F/450F model dirt bikes.

**** HRF RECOMMENDS USING A 1/4" OR 5/16" THICK SAFETY FLAG. DO NOT USE THE BIG 3/8" THICK BUGGY/TRUCK FLAGS. THESE ARE TOO BIG FOR BIKES ****

Retail Price: $39.99
HRF Kawasaki 2016-2017 KX450F whip mount

This whip mount is made specifically for the 2016-2017 Kawasaki KX450F. It bolts up to the exhaust mount bolt and the lower fender bolt. Just remove your right side number plate panel, then remove the exhaust mounting bolt and the lower fender bolt. Slide the HRF whip mount between the subframe and the muffler, reinstall the exhaust mounting bolt and the lower fender bolt. Now just reinstall the number plate and you are ready to go.

**** HRF RECOMMENDS USING A 1/4" OR 5/16" THICK SAFETY FLAG. DO NOT USE THE BIG 3/8" THICK BUGGY/TRUCK FLAGS. THESE ARE TOO BIG FOR BIKES ****

Note: The HRF quick release flag holder shown in the pictures is sold separately. Click here to order the quick release flag holder.

Retail Price: $44.99