Check out the new HRF MC flag holder. This quick release flag holder uses an internal ball to keep the safety flag secure in the flag holder. Just tighten the outer flat head tip to the desired tension on the flag and then you can slide the safety flag in and out with out any tools. Available in 1/4" or 5/16"
NOTE: This flag holder will come preset on the tension for the flag pole. You may want to adjust it if you would like it a little tighter or looser. The flag pole should slide right in with a little pressure but it should not lift back out very easily. If it comes out with very little effort then the ball on the side is too loose. If it is very difficult to pull the flag back out then it is too tight. The flag pole does not side all the way through the flag holder. It should stop, but there is a little hole on the bottom that you can use something to push out any broken fragments if you should brake the flag.
